在线可拆装式靶式流量计安装说明
Online detachable target flowmeter
Installation instructions
安装配件
Installation Accessories
1、可伸缩流量计装置;
2、球阀;
2、Ball valve;
3、焊接短管。
3、Welding short tubes.
安装过程
Installation process
1、将焊接短管焊在管道上;
1, welding welded short pipes on the pipeline;
2、将球阀用螺栓固定在焊接短管上;
2, the ball valve is bolted to the welded short pipe;
3、将可伸缩流量计装置用螺栓固定在球阀上;(注意:按箭头指示方向固定)
3, the retractable flowmeter device is bolted to the ball valve; (Note: Fixed by arrow direction)
4、全部固定完毕后,缓慢打开球阀,将流量计缓慢旋进管道,旋到位后按所铣箭槽对准成一字线(保证靶片正对流体方向),然后将6枚锁紧螺丝紧固后再调整仪表零点即可。
4, after all the fixed, slowly open the ball valve, slowly rotating the flowmeter into the pipeline, after the rotation is in place, aligned with the milling arrow slot into a line(ensure that the target is in the direction of the fluid), Then tighten the six locking screws and adjust the instrument zero point.
质量流量计直接测量通过流量计的介质的质量流量,还可测量介质的密度及间接测量介质的温度。由于变送器是以单片机为核心的智能仪表,因此可根据上述三个基本量而导出多种参数供用户使用。 质量流量计组态灵活,功能强大,性能价格比高,是新一代流量仪表。
查看产品智能流量计以其特有的抗干扰、抗杂质性能,除能替代常规流量所能测量的流量计量问题,尤其在高粘度、脏污介质、易凝易堵、高温、低温、强腐蚀等流量计量困难的工况中具有很好的适应性。 ◆ 管径范围宽:Φ15~Φ3000至更大; ◆ 温度范围广:-20 ~ 500℃; ◆ 适用多种介质:气体、蒸汽; ◆ 适用于低流速介质,其可测量最低流速为0.08m/s。
查看产品电磁流量计是20世纪50~60年代随着电子技术的发展而迅速发展起来的新型流量测量仪表。 电磁流量计是应用电磁感应原理, 根据导电流体通过外加磁场时感生的电动势来测量导电流体流量的一种仪器。
查看产品